Purchase this item and get Description
SpeeCo Category-1 E-Hitch – Overview
Hooking up rear attachments to a 3-Pt Hitch can be a real pain. But it doesn’t have to be. A quick hitch will typically reduce your effort by 90%, and best case scenario you don’t even need to leave your seat. The more you change attachments or the heavier attachments you use, the more you’ll benefit from a quick hitch.
The unique design of the SpeeCo E-Hitch will not just save you time, but money too compared to other quick hitches.
Save Money!
This quick hitch doesn’t require bushings for your attachments! The John Deere iMatch and all others require you to buy and install a $40+ set of bushings on each 3 point attachment. You can completely avoid that expense with this quick hitch. The lower two hooks are sized to be a direct fit to a Category 1 pin size!
SpeeCo Category-1 Hitch – Extra Features
This Category 1 E-Hitch fits most Category 1 tractors and is for use with Category 1 equipment. Includes two lower pins, no top pin.
- Currently Available Only in Red
- Inside Dimensions: 27 1/4″
- Outside Dimensions: 29 1/2″
- Lower Hook Slot Inside Diameter: 1″
- Top Link Slot Inside Diameter: 1 3/8″
- Bottom to Top Hook Height: 14 1/2 – 17 1/2″
- Weight: 70 lb
- No maximum lift capacity. If your tractor can lift it, then so can the Speeco.
- Lots of adjustability between lower links and top links to fit a wide variation of attachments.
- Bonus! Both lower pins are included. 3/4″ TOP PIN IS NOT INCLUDED. Uses a top pin like any other 3-point attachment.
TRICK OUT YOUR SPEECO!
- Add Hitch Hangers to hang more weight without tying up the 3 point! Buy here!
- Need a trailer mover? Ours has a 2″ receiver, weight rack, chains hooks, and more! Buy here!
- Want quick change pins for the top hook? Click here!
__
GWT VERSABRACKET BUNDLE HIGHLIGHTS
This Made in USA Cat 1, 3-Point Hitch bracket is made to hold up to 8 suitcase weights, either 41lb each or 70 lb each. What sets this bracket apart is the chainsaw carrier slot for up to a 20″ bar, as well as a 2″ receiver, two chain hooks, and quick hitch compatibility, making it something to leave on your tractor whenever you aren’t running an attachment.
- Compatible with 3 point hitch receiver Category 1 systems
- 2″ Receiver
- 2 Chain Hooks
- Chainsaw carrier slot for up to 20″ Bar
- Quick Hitch Compatible**
- Room for Eight 41 lb or 70 lb suitcase weights
- Eight 41 lb weights totals about 378 lb including the bracket
- Eight 70 lb weights totals about 610 lb including the bracket
- 1/2″ Flat Bar Stock
- 3/16″ Tube Steel
- Both lower pins included, 3/4″ top pin not included.
- Made in the USA
*Consult your owner’s manual to see recommended ballast weight when operating a loader. Along with increased safety, you will gain an increase in traction which can be especially helpful in snow, ice, and mud.
**Matches most 3 point quick hitch systems built to the ASE Standard S278.5
_____
GWT HITCH HANGER BUNDLE HIGHLIGHTS
The Hitch Hanger is a bracket that attaches with a simple strap connection to your quick hitch, allowing you to hang three suitcase weights (41or 70 lb) off to the side, while still keeping the connection to your quick hitch and your three-point attachment.
HOW MUCH COUNTERWEIGHT DO YOU NEED?
The answer to this is tractor specific, but your manual should indicate the recommended rear ballast or counterweight to balance against your front-end loader. This can be in the form of liquid ballast in you wheels, wheel weights, and the weight of the rear attachment itself. But often this is not enough weight to hit the manufacturer recommended total. Enter the hitch hanger, which provides a solution to gain that additional weight without increasing your footprint.
WHAT 3-PT ATTACHMENTS NEED MORE WEIGHT?
A 3-Pt Hitch does not product any down-pressure, so if you are running a ground engaging attachment you’re reliant upon the weight of that attachment for all of its digging power. This includes plows, discs, pluggers, aerators, tillers, and box-blades or graders. Some times the attachment will have a shelf for adding weight, but many do not. Using our Hitch Hangers is a great way to gain downward force for that attachment, providing better, faster results.
Priced per pair (1 left, 1 right) w/ 6 suitcase weights of your choosing.
HIGHLIGHTS
- Fits Category 1 Speeco E-Hitch and similar Cat 1 square tube hitches
- Made In The USA using American steel and manpower!
- Powdercoated black
- Great for additional ballast weight
- Free up your quick hitch for an attachment instead of dead weight!
- Some 3 point attachments need more down pressure, these can help!
- Simple strap and nylon nut connection is included for secured fastening
- Always carry weight as low to the ground as possible to lower your center of gravity
- Patent Pending
- Each Hanger weights 15 lb
- Includes 6 Suitcase weights of either 41 or 70 lb (up to 420 lb total!)
Jacob Page –
Purchased these along with my tractor from Good Works. All of the videos they have put out showing the ease of using anything and everything on the back sold me. Cheap money for something that makes life easy!!! You won’t regret your purchase of this Quick Hitch.