Heavy Duty 3-Point Dethatcher Rake (60″) CMP Attachments

3-POINT 60’’ Heavy Duty DETHATCHER – Overview

One of the most versatile attachments for your tractor!

At 60” this dethatcher is a little wider than the footprint of most subcompact and compact tractors, but it’s so light that isn’t a problem. You’ll cover even more ground quicker without worrying about not fitting in hard-to-navigate spaces, or maintaining ground contact over uneven territory. We use a dethatcher on our tractor all the time and you can see us demonstrate completely clearing our trails of leaves in just two passes, dethatching our lawn, breaking apart aerated soil plugs, removing pine straw to down to the bare dirt, lightly grading our gravel drive, and more in the videos below.

Benefits of a 3-Point Vs Pull-Type Dethatcher

You no longer need to take wide turns to make sure your pull-behind dethatcher tongue clears, this 3-point beauty mounts tight and turns with you. This ultra rugged 3-point tractor dethatcher rake is the ideal tool for dethatching grass in your yard, pastures, food plots, basically anywhere. It’s not just for grass though, you can use it for grooming horse arenas, leveling driveways, pre-seeding dirt, raking leaves and sticks, or countless other uses.

Note: The CMP HD 3-Point Dethatcher is designed for use with 3-Point arms in the lowest position, a minimum of 11″ from the ground.  Aftermarket or oversized tires may affect this height, please verify your lowest lift arm height before placing an order. Dethatchers do not include top link pin or safety pins to retain attachments on the tractor.

Why Use a 3-Point Dethatcher?

Thatch is a layer of dead grass, roots and other small lawn debris between the top growth of your grass and the roots. Thatch acts like a barrier to your lawn, preventing essential moisture, air, and nutrients from entering your lawn’s root system. Removing this layer (Dethatching) helps your lawn’s root system prosper. If you plan to seed, dethatching is an important step that should not be overlooked before spreading. Seed will often take root in thatch rather than the soil, and will die out quickly due to insufficient access to nutrients and water. Unlike a landscape rake, the dethatcher is gentle on your lawn preventing damage.

Features of the 3-point Dethatcher:

• 60″ Wide Raking Width
• Cat I 3-Point and Quick Hitch Compatible
• Heavy Duty steel construction with tough powder-coat finish ensures long lasting durability.
• Dual bars of replaceable spring steel tines.
• Ideal for grading, leveling, spreading, raking, and of course, dethatching.
• Even makes for super smooth ball diamonds, gravel driveways, and parking lots.
• *Please allow for a 1-week processing time*

Please Note: The CMP HD 3-Point Dethatcher is designed for use with standard compact utility tractors with the 3pt arms in the lowest position,  a minimum of 11″ from the ground.  Aftermarket or oversized tires may affect this height, please verify your lowest lift arm height before placing an order. Dethatchers do not include top link pin or safety pins to retain attachments on the tractor.

Upgrade your 3-point attachment performance, improve operator efficiency, and get better results on your projects with a hydraulic top and tilt kit. These hydraulic cylinders replace your manual top and side link on the 3-point hitch and allow you to make adjustments on the fly to your 3-point attachment.  Save 5% with code GWT at Summit Hydraulics.  Do-it-yourself hydraulics solutions that will completely change the way you use your tractor.

GWT FAST CAT I QUICK HITCH

A CATEGORY I 3-POINT QUICK HITCH TO MAKE CONNECTING ATTACHMENTS EASIER.

We don’t operate a tractor without a quick hitch because it only makes our lives easier. Most 3-Point attachments are quick hitch compatible, and even some that weren’t are being redesigned to fit (like the Del Morino Funny Top Flail Mower).

The GWT Fast Cat I will make connecting to a rear attachment so much easier. Sometimes you can hook up without leaving your seat.

If you’re shopping for a Category I Quick Hitch there is no reason to use one that doesn’t use a direct pin fitment. This means that the pins on your attachment will fit directly into the lower hook of the quick hitch.

Most quick hitches have an oversized lower hook that requires you to place a bushing over the attachment’s pin before slotting onto the quick hitch. This is an unnecessary cost and item to keep track of. GWT’s Fast Cat Quick Hitch doesn’t require a bushing.

We designed the GWT Fast Cat to improve on our best selling Speeco E-Hitch in every way we can think of, including pieces that used to be additional purchases, and increasing the warranty from 1 year to 2 years.

FAST CAT I QUICK HITCH SPECS

Fast Cat dimensions are universal for quick hitch standards. Always verify your attachment measurements will fit prior to purchase.

• Lower Hook-to-Hook Inside Dimensions: 27 1/4″
• Lower Hook-to-Hook Outside Dimensions: 29 1/2″
• Lower Hook Slot Inside Diameter: 1″
• Top Link Slot Inside Diameter: 1 3/8″
• Bottom to Top Hook Height: 14 1/2 – 17 1/2″
• Weight: 72 lb
• Top Hook Adjustability To Fit A Huge Array of Attachments
• Made in India, not China!
• No maximum lift capacity.
  • If your tractor can lift it, so can the Fast Cat.

For Full Details on the GWT Fast Cat I Quick Hitch, visit this listing here.