Purchase this item and get Description
Our GWT Mini Add-A-Wrecker is similar to our GWT Mini Wrecker, but designed to attach to our GWT VersaFrame instead of directly to your Front-End Loader. You may also hear us call it the Mini VersaWrecker.
*Since you’ll be placing a load on the front end of your tractor with this attachment, be sure to have counterweight on the rear of your tractor to avoid a dangerous scenario. Check out our VersaBracket Bundle for a compact weight rack solution.
More nimble than your backhoe, the GWT Mini Add-A-Wrecker can handle lots of digging projects for a fraction of the cost. As the saying goes, “it sure beats a shovel.”
If you need to remove small stumps, saplings, old landscaping, dig holes for new shrubs or trees, create shallow trenches, or carry boulders, then this stump bucket is just what you’re looking for!
GWT Mini Add-A-Wrecker STUMP Bucket USES:
- Stump removal
- Landscape shrub/small tree removal
- Hole prep for tree/shrub planting
- Buried boulder removal
- Digging trenches to fix drainage issues
- Scarifying/scratching earth to loosen compacted soil
- Backfilling
GWT MINI Add-A-Wrecker STUMP Bucket HIGHLIGHTS
- Made In The USA using American steel and manpower!
- 18″ front to back, 9″ wide digging edge
- Intentionally sized for smaller tractors—shorter front to back, tapered end for greater leverage
- Rated for up to 32 hp (such as John Deere 2032R, Kubota LX2610, Kioti CX, Mahindra Max, and similar)
- Weight 50 lb
- Available in Black Only
- Bucket and back plate made from 1/4″ A36 steel
- Replaceable Digging Edges in Six Styles
- Regular (included in purchase), Shovel, Ripper, and Square (with combo edges available)
- Constructed from 1/4″ AR400 Steel
- Bolt-On with three 3/8 x 1″ Grade 2 Bolts
- Dual-action serrated edges along bucket edges, mimics a Sawzall or reciprocating saw blade
- Replaceable bolt-on digging edge, meant to be the sacrificial point of the design, similar to a shear bolt on a rotary cutter (comes with one, add’l available)
- Integrated chain slot for strapping or pulling logs
- Powder Coated Finish
- Phosphate wash followed by a burn cycle of 400º F for 30 minutes prior to powder coat
- No additional connections required!
- Connects to VersaFrame with Top Hooks and a Bottom Steel “Plunger” that is pinned to the frame during use.
Based on our Mini Stump Bucket, we developed and designed this Mini Add-A-Wrecker, not because there weren’t other options on the market, but because we didn’t like any of those options available. Most were too large rendering them useless for subcompact and small compact tractors. Others were proprietary in design forcing you to buy their system, and none of them had a combination of all the features we thought should be on the product.
The Mini Add-A-Wrecker is part of our modular GWT Versa System, which includes the main component, the GWT VersaFrame, and you can shop for optional add-ons for the frame, like pallet fork tines, and this stump bucket (with more options in development).
DIGGING EDGES
We offer six different digging edges: Regular, Double-sided Regular, Ripper / Regular Combo, Shovel / Regular Combo, Square / Regular Combo, and Ripper / Square Combo
Regular Digging Edge: A short, three-pronged design that’s been successful for general digging and stump removal. One of these edges is included with the purchase.
Double-Sided Regular Digging Edge: Gain twice the life from your digging edge with a double-sided version.
Ripper / Regular Combo Edge: Add a Ripper to one side of your edge to better tackle lots of roots or large roots.
Shovel / Regular Combo Edge: Add a Shovel side to your edge for digging holes to plant.
Square Scraper / Regular Combo Edge: Add a square side to your edge for flat bottom trenching.
Ripper / Square Scraper Combo Edge: With a Square side and a Ripper you can cut your roots and then trench.
____
GWT VERSAFRAME HIGHLIGHTS
- Versa Frame is 100% Made in the USA—American Steel, American Labor
- Mounts to Front-End Loader or Cat I 3-Point Hitch or Quick Hitch
- JDQA or SSQA Connection
- JDQA available in green, weighs 106 lb
- SSQA available in black, weighs 109 lb
- JDQA or SSQA Connection
- Features a 2″ Receiver for Trailer Mover
- Features a Top Receiver for Gooseneck Trailer Hitch
- Features Dual Welded Chain Hooks
- Integrated Weight Rack Holds up to Eight 41 or 70 lb Suitcase Weights*
- Can be used for counterweight
- Can be used to increase overall traction
- Built-in Parking Stands make 3-Pt hook up easier
*Suitcase weights can’t be used if mounted on a quick hitch
____
GWT VERSAFORKS SPECS
- 2,000 lb rated forks at 24″ L.C. (Load Center)
- Fits Class II Fork Tines
- 16″ From Bottom Carriage Rail to Top Carriage Rail
- JDQA Weight with 42″ tines, 258 lb
- SSQA Weight with 42″ tines, 261 lb
- 1 Year Manufacturer’s Warranty*
Note: fork tines are raw steel and sometimes may have areas of light surface rust. Very common and will not affect the fork performance at all. There is no reason to paint fork tines when they will quickly lose their finish under normal use. This surface rust will disappear with normal use.
GWT VERSAFORKS WEIGHTS |
||
| JDQA | SSQA | |
| 36“ | 235 lb | 240 lb |
| 42“ | 276 lb | 281 lb |
| 48“ | 298 lb | 299 lb |
| Frame Only | 119 lb | 123 lb |
Which tractors are these pallet forks designed for?
These pallet forks are meant to fit most modern subcompact and compact tractors. This includes popular subcompact models such as the John Deere 1025r, Kubota BX Series, and those similar by Kioti, Mahindra, LS, and more. These pallet forks also fit larger compact tractors such as the John Deere 2025r, 2038r, 3039r, Kubota LX Series, Kubota L Series, and Kubota Grand L Series. These pallet forks are also a great fit for tractors without a front end loader. These pallet forks can mount directly to your 3 point hitch.
Upgrade your 3-point attachment performance, improve operator efficiency, and get better results on your projects with a hydraulic top and tilt kit. These hydraulic cylinders replace your manual top and side link on the 3-point hitch and allow you to make adjustments on the fly to your 3-point attachment.
Save 5% with code GWT at Summit Hydraulics. Do-it-yourself hydraulics solutions that will completely change the way you use your tractor.
Warranty
Every GWT product is covered by a 1-Year Factory Warranty starting from the day of delivery.
What is covered
Your GWT Factory Warranty covers issues stemming from the craftsmanship of the product, like broken welds, torn steel, or improper fit. Our tools are generally designed to be used in harsh environments, so normal wear-and-tear is not covered (things like lost paint or chipped paint, scratches, dents, or bent teeth).
We will repair or replace, at our discretion, your GWT product so long as it is covered under warranty.
What isn’t covered
Any shipping necessary for repair or replacement, as well as transportation costs are not covered under the factory warranty. Lost time and down time are not covered. Replacement parts are covered, but not labor costs.
If damage occurs from improper use (a use other than what the product is marketed for), the warranty is void. Damage caused to your tractor while using a GWT product will not be covered.
Your warranty is non-transferable, meaning it exists as long as you’re the owner and operator of the product.
Extended Warranties
For each GWT product you have the option to increase the standard 1-Year Warranty to a Lifetime Warranty! This takes the exact same coverage and extends it in perpetuity from date of delivery.
Reviews
There are no reviews yet.