SPECIAL OFFER! Save 30% On Precision Big Mouth Grapples

Sale!

Hydraulic Auger / Post Hole Digger IronCraft for SSQA Loaders

$2,399.00$2,943.00

-

Run a Hydraulic Powered Auger off your tractor or skid steer’s loader with as low as 5 gpm of hydraulic flow.

Three drive sizes available to power augers from 4″ in diameter up to 36″. Augers are 48″ in length. Available for SSQA only.

*Free Shipping

Factory Warranty

Select delivery location

Purchase this item and get 2399-2943 Points worth $23.99-$29.43 to save on future orders!  You must register an account to track receive and track points.
Purchase this item and get 2399-2943 Points worth $23.99-$29.43 to save on future orders!  You must register an account to track receive and track points.

Before you buy, read our shipping FAQ

Description

IronCraft Hydraulic Auger Drive Details

The IronCraft Auger Drive is available in three different models for small, medium, and large digging needs (1500, 2500, and 3500 Drive, respectively). Each series features a 2″ hex drive shaft that will hold bits from 4″ in diameter up to 36″ depending on the model (see specs below). Each auger is 48″ in length.

The most common uses of an auger drive are to dig holes for fence posts or concrete piers.

These are high-torque bits designed for tough conditions, and a heavy-duty planetary drive eliminates the common issue of shaft pullout. Available for skid steers and tractors with an SSQA mount.

Available for skid steers and tractors with an SSQA mount only.

Gain Extra Hydraulic Power For Your Tractor

If your tractor lacks hydraulic power, you can add a PTO Powered Hydraulic Power Pack, and better run hydraulic attachments.

Available in a 14 gpm or 21 gpm model, the Power Pack connects to your 3-Point and rear 540rpm PTO. Then you plumb it to your front-end loader to run augers, brooms, brush hogs, 6-N-1 Buckets, and more!


Auger Drive Specs

    Model 1500 (X1100) 2500 (X2100) 3500 (X2700)
    Weight (lb) 101 135 140
    Flow Range (gpm) 5–13 7–17 10–25
    Max Pressure (psi) 2,973 3,600 3,600
    Max Torque @ 3500 psi (ft / lb) 1,103 2,100 2,700
    Speed @ Max Torque (rpm) 98 87 97
    Output Shaft 2″ Hex 2″ Hex 2″ Hex
    Recommended Bit Size (in) 4 to 16 4 to 24 4 to 36

     


    Lifetime Warranty

    Increase the standard manufacturer’s warranty to GWT’s Lifetime Warranty.

    What is covered

    Your GWT Lifetime Warranty covers issues stemming from the craftsmanship of the product, like broken welds, torn steel, or improper fit. Tractor attachments are generally designed to be used in harsh environments, so normal wear-and-tear is not covered (things like lost paint or chipped paint, scratches, dents, or bent teeth).

    We will repair or replace, at our discretion, your attachment/product under the Lifetime Warranty, if purchased.

    What isn’t covered

    Any shipping necessary for repair or replacement, as well as transportation costs are not covered under the factory warranty. Lost time and down time are not covered. Replacement parts are covered, but not labor costs.

    If damage occurs from improper use (a use other than what the product is marketed for), the warranty is void. Damage caused to your tractor while using an attachment will not be covered.

    Your warranty is non-transferable, meaning it exists as long as you’re the owner and operator of the product.

    Additional information

    Auger Drive Series

    1500 (5-13 gpm), 2500 (7-17 gpm), 3500 (10-25 gpm), HAD (10–25 gpm)

    Reviews

    There are no reviews yet.

    Be the first to review “Hydraulic Auger / Post Hole Digger IronCraft for SSQA Loaders

    Your email address will not be published. Required fields are marked *


    AN ATTACHMENT FOR EVERY JOB!CHECK OUT THE FULL LINEUP!

    See It Now
    Attachments for tractors - Good Works Tractors

    Get Useful Tips & Tricks Sent Directly To Your InboxSign Up For Our Newsletter